gendoc
Junior Member
Posts: 66
|
Post by gendoc on Feb 12, 2017 15:51:12 GMT -5
i recently bought a barrel and this is the BP....it appears to be a modified encore plug to use bushings. anyone know who does this work and how i can contact them ?? i was told it was CMC, but i have been told otherwise. thanks for looking and any info is appreciated.
|
|
|
Post by speedrackin on Feb 12, 2017 16:12:08 GMT -5
TRY CECIL @ PR BULLET.
|
|
|
Post by 12ptdroptine on Feb 12, 2017 18:34:42 GMT -5
Looks similar to mine. But I dont have it modified for bushings. Mine is Pete's plug at PA Machine Drop
|
|
|
Post by boonechaser on Feb 12, 2017 19:22:14 GMT -5
Pete's would have been my guess. But am almost positive that I seen a SMI bushing plug that looks like that.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2017 19:22:42 GMT -5
Jeff sells a plug to replace it with LRMP.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2017 19:30:50 GMT -5
Pete's would have been my guess. But am almost positive that I seen a SMI bushing plug that looks like that. I don't think SMI's had that snout on the end of it???
|
|
|
Post by boonechaser on Feb 12, 2017 19:31:02 GMT -5
Pete's would have been my guess. But am almost positive that I seen a SMI bushing plug that looks like that. Nope, remember now... Fishhawk was modding the SMI plug (almost positive of this) might try him. Not sure if he is on this board but know he is on the other
|
|
|
Post by boonechaser on Feb 12, 2017 19:34:44 GMT -5
Pete's would have been my guess. But am almost positive that I seen a SMI bushing plug that looks like that. I don't think SMI's had that snout on the end of it??? Your right, maybe fishhawk was just modding a different plug but thought I seen a post on other board once. That someone posted about having a modded one done and fishhawk said he could. ill bow out as I am not positive
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 12, 2017 19:38:42 GMT -5
The plug on the left is one rossman40 made for my SMI conversion and the one on the right is the original SMI plug...fishhawk put a bushing in it also.
|
|
gendoc
Junior Member
Posts: 66
|
Post by gendoc on Feb 12, 2017 19:39:43 GMT -5
Jeff sells a plug to replace it with LRMP. that would be great....
|
|
|
Post by Richard on Feb 12, 2017 22:37:36 GMT -5
Well, Rambler's plugs don't resemble gendoc's? Fishawk does frequent this forum.
|
|
|
Post by fishhawk on Feb 13, 2017 12:10:56 GMT -5
Could that be one of Hunter's smoker plugs? Does the barrel have any markings? I may have machined it for a bushing, but not positive who made the plug. There are a few out there shooting smokeless in 700ml factory barrels with Hunters boltnose kit and plug.
|
|
|
Post by hunter on Feb 13, 2017 17:22:42 GMT -5
That is not my plug for the 700ml
|
|
gendoc
Junior Member
Posts: 66
|
Post by gendoc on Feb 13, 2017 17:38:48 GMT -5
this plug is for a custom MGM 50cal Encore barrel made for smokeless powder according to what i've been told. its positively an MGM fluted 24" 50cal barrel. thats about all i know at this time. thank you all for your information.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2017 19:18:16 GMT -5
Hankins 11/16-20 Repair Plug System (HRPS)
|
|
gendoc
Junior Member
Posts: 66
|
Post by gendoc on Feb 13, 2017 19:52:58 GMT -5
Hankins 11/16-20 Repair Plug System (HRPS) is this currently available ? thank you !!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2017 20:00:58 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2017 20:03:10 GMT -5
Hankins 11/16-20 Repair Plug System (HRPS) is this currently available ? thank you !! PHONE: 859-428-2336 CELL: 859-322-5233
|
|
gendoc
Junior Member
Posts: 66
|
Post by gendoc on Feb 13, 2017 20:17:37 GMT -5
thank you all, i will be checking into this very soon.
|
|
|
Post by fishhawk on Feb 14, 2017 9:47:10 GMT -5
The bushing looks too fat to be mine?
|
|