|
|
Post by deadeye on Feb 14, 2017 10:20:16 GMT -5
the first bushing I ever saw before any were available from someone in Michigan IIRC,can't remember his name or handle & he was not on much.
I did find one of his bushing's in my box. OD=.312// length=.375//// .0275 flashhole...........the bushing & setscrew in my plug resembles the pic but the plug is not the same as mine.
not much help but I would do the HIS conversion listed above. you will be much happier in the end. |
|
gendoc
Junior Member
Posts: 66
|
Post by gendoc on Feb 27, 2017 17:54:26 GMT -5
i'm about to send my barrel to jeff for him to make this thing trouble free !!
i'm done with 209's & BS plug mods... in this 50
thank you folks for your help & information...i have learned a lot here !!
|
|
gendoc
Junior Member
Posts: 66
|
Post by gendoc on Mar 8, 2017 20:39:44 GMT -5
a call from Jeff this afternoon about shipping my barrel back with his
ignition system with 45/70 extractor installed !!!
now that was great news....i cant wait to try it.
thanks Jeff and everyone that gave me this information.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 9, 2017 9:02:17 GMT -5
Welcome
|
|
|
|
Post by Richard on Mar 9, 2017 11:51:27 GMT -5
Deadeye.............that had to be Al Rochefort (I have his e-mail address and converse with him occasionally) He had a big black bear head as his Avatar! He was a supervisor for a large commercial machine shop an excellent machinist himself. He made me several sizing dies and gave me a lot of help!
|
|
