|
|
Post by 247deer on Sept 6, 2015 22:05:05 GMT -5
|
|
|
|
Post by 247deer on Sept 6, 2015 22:12:40 GMT -5
 
All the photos did not load |
|
|
|
Post by hillbill on Sept 6, 2015 22:30:35 GMT -5
very tight, your deer load is found!
|
|
|
|
Post by keith on Sept 6, 2015 22:34:36 GMT -5
What power is that optic because those look like 1" diamonds?
|
|
|
|
Post by 247deer on Sept 6, 2015 23:18:15 GMT -5
What power is that optic because those look like 1" diamonds? It is a 1"diamond point to point 3/4 across the scope in the picture belonged to Hillbill I have a Leupold VX6 4-25x52 on it now |
|
|
|
Post by Hank on Sept 6, 2015 23:59:19 GMT -5
Very nice shooting. 300 yard strong..
|
|
|
|
Post by rojo23 on Sept 7, 2015 5:55:27 GMT -5
is the 73 grains of 4198 the typical load for the 300 mh? I wanted to see how the heavier bullets shoot for me. I would be very happy with those groups, great shooting.
|
|
|
|
Post by 247deer on Sept 7, 2015 6:33:43 GMT -5
is the 73 grains of 4198 the typical load for the 300 mh? I wanted to see how the heavier bullets shoot for me. I would be very happy with those groups, great shooting. Not sure if it is typical, but I was told to try it with the 327 mh so I figured with the 300mh it would be ok. One thing I did different was I waited 4 or 5 minutes between shots.Gun has shot some good groups with the 300BE but this is the best group yet ordered another 50 from Luke when I got home |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 7, 2015 6:54:30 GMT -5
I'd say you've found a workable load. And no brake on the gun. Nice shooting and good looking gun.
|
|
|
|
Post by hillbill on Sept 7, 2015 7:07:58 GMT -5
I also use 73 grns for 300s and get good accuracy
|
|
|
|
Post by 247deer on Sept 7, 2015 7:20:07 GMT -5
I'd say you've found a workable load. And no brake on the gun. Nice shooting and good looking gun. When i shot the 327MH it was eye opening almost got the scope I think the new one will get a break just in case. 300MH not bad for recoil |
|
|
|
Post by keith on Sept 7, 2015 7:51:39 GMT -5
Yeah, once I get over a 300gn bullet and 65gn of 4198 I want my break. That is a fine shooting gun with the 300gn bullet. What twist is your barrel?
|
|
|
|
Post by 247deer on Sept 7, 2015 8:55:23 GMT -5
Yeah, once I get over a 300gn bullet and 65gn of 4198 I want my break. That is a fine shooting gun with the 300gn bullet. What twist is your barrel? Not sure barrel was ordered by Bill Travis from Jeff |
|
|
|
Post by Hank on Sept 7, 2015 8:57:43 GMT -5
Its a 1-20 twist.. Brux
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 7, 2015 9:57:02 GMT -5
Great shooting...glad you got her dialed in now...
|
|
|
|
Post by Kyle on Sept 7, 2015 13:18:23 GMT -5
Good shooting!!! Hope you have a good hunting season!
|
|
|
|
Post by Richard on Sept 7, 2015 13:31:48 GMT -5
You definitely have it dialed in...........Don't bother coming to the next Challenge:)
|
|
|
|
Post by markb317 on Sept 7, 2015 15:42:30 GMT -5
You might try some 4831 powder with the 327 and see how they shoot.
|
|
|
|
Post by 247deer on Sept 7, 2015 16:00:34 GMT -5
You might try some 4831 powder with the 327 and see how they shoot. What kind of load would you suggest?? Minimum maximum start point |
|
|
|
Post by typical171 on Sept 7, 2015 19:50:37 GMT -5
nice shooting there bud, I envy that group!
|
|
[img src="http://i799.photobuc
Went out last weekend and shot the 327 MH shot 90GR 3031 and 73 gr IMR4198 at 300YD shot ok not great went out this weekend with 300MH with 73gr IMR 4198 first shot was a little high with clean barrel next 3 almost one hole 300YD
