|
|
Post by buckstuds on Mar 8, 2016 13:28:46 GMT -5
I wasn't planning on shooting again with this load, but to confirm the accuracy of this load I did. Except I can't leave things alone. I moved the sizing die a very little bit to increase size of bullet. 275 accumax. Very tite fit down the bore, two hands. I found by doing this the point of aim moved slightly. Group stayed pretty close. I also found out by barrel is a little tighter the last six inches before seating.  |
|
|
|
Post by Kyle on Mar 8, 2016 15:32:51 GMT -5
Very respectable group!!! Good shooting!!
|
|
|
|
Post by Richard on Mar 8, 2016 15:40:56 GMT -5
Nothing wrong with that Lyman!
|
|
|
|
Post by kskaggs on Mar 8, 2016 15:48:32 GMT -5
Lyman which primer are you using?
|
|
|
|
Post by buckstuds on Mar 8, 2016 16:05:36 GMT -5
cci mag
|
|
|
|
Post by kskaggs on Mar 8, 2016 18:09:10 GMT -5
I was shooting win lrm I wonder if that is why the group is opening up with 78 grains just a thought!!
|
|
|
|
Post by buckstuds on Mar 8, 2016 18:15:24 GMT -5
I tried them first 20 rounds and were very hard to install with hand primer. Found ccis and are easier to install.
|
|
