gfunk
New Member
Posts: 13
|
Post by gfunk on May 14, 2024 19:43:43 GMT -5
Is there a special technique to remove and install the breech plug? I was able to remove it from scout w no issue but it catches on the ejector when trying to put it back in.
|
|
|
Post by buckeye68 on May 14, 2024 22:00:23 GMT -5
Knock out the roll pin with a punch and remove the ejector. Don’t loose the tiny spring!
Another option is to change it over to a DI plug.
|
|
gfunk
New Member
Posts: 13
|
Post by gfunk on May 15, 2024 5:55:55 GMT -5
Thanks Buckeye!!!!
|
|
|
Post by SURESHOT on May 15, 2024 6:53:12 GMT -5
If you loose the spring and or the roll pin call CVA, I have replaced the spring from an ink pen, another is glue it in the socket, a small small amount of silicone,
|
|
|
Post by Richard on May 16, 2024 21:43:58 GMT -5
I found that with a small screwdriver you can actually move the extractor out of the way enough that you can get the breech plug in and out.
|
|