|
Post by drinkwaj280 on Sept 24, 2023 9:02:10 GMT -5
I have a Scout 45 conversion the forearm will not tighten up after adjustment. Doesn't seem to matter which way I go with the adjustment screw it's still wiggles around. My other Scout conversion locks up tight and is solid when placed back on rifle. What could cause this? Is the forearm the issue? Thanks.
|
|
|
Post by SURESHOT on Sept 24, 2023 9:40:14 GMT -5
with these and you more than likely have done this already, have to loosen the very small set screw, then back out the larger screw all this is located on the barrel under the for arm. Sounds like I would try a 1/2 turn, then try the forarm again until it tightens up, and keep adjusting until, then set the set screw back to lock down the larger black screw with 242 loctite as you know the forarm should snap in. If it does not work I would compare to my other Scouts forarm or even try it on the problem one, If its a problem contact CVA, they have sent me parts that I have asked for, this is for the CVA SCOUT V2,
|
|