Post by Kyle on Jan 10, 2016 13:57:43 GMT -5
I spoke with Phil Gunn of Gunn Innovations, maker of Spinjag, on Friday about making a series of Spinjags for my AccuMax .452's. He said he would be glad to look into it if I sent him a sample bullet. Yesterday, Saturday 1/9, I shipped out a sample to him. Got the ball rolling and hopefully it won't be long.
In the meantime modification of existing Spinjags is a simple operation. Experienced shooters are reporting two solutions. One is the simple replacement of the hex head screw in the jag with a lower profile Phillips head screw. The other solution is to remove the existing screw, drill the brass out about .050" or so deeper and reinstall the screw.
In the meantime modification of existing Spinjags is a simple operation. Experienced shooters are reporting two solutions. One is the simple replacement of the hex head screw in the jag with a lower profile Phillips head screw. The other solution is to remove the existing screw, drill the brass out about .050" or so deeper and reinstall the screw.
