|
Post by iweetodid on Oct 5, 2021 14:47:47 GMT -5
Can bullets be bumped up to a larger diameter? I bought some 50 caliber hornady bullets .500 that I thought I could use in my Remington 700 ml but the bullets are slowly sliding down the barrel. No need to push them down?
|
|
|
Post by joelmoney on Oct 5, 2021 15:34:55 GMT -5
Not sure what bullet but it might be possible to knurl them with a couple files. Just a shot in the dark idea.
|
|
|
Post by iweetodid on Oct 5, 2021 21:54:14 GMT -5
Not sure what bullet but it might be possible to knurl them with a couple files. Just a shot in the dark idea. Not sure how to do that but I might try powder coating them with 2 or 3 coats and see if they will tighten up. I am sure they will bump up with a good charge of t7. Thanks for your reply.
|
|
|
Post by joelmoney on Oct 5, 2021 22:29:16 GMT -5
|
|
|
Post by iweetodid on Oct 6, 2021 10:57:14 GMT -5
That is awesome dude, thank you very much.
|
|
|
Post by Hank on Oct 6, 2021 14:58:09 GMT -5
Use the files, much easier than powder coating them.
|
|
|
Post by iweetodid on Oct 6, 2021 20:18:16 GMT -5
Use the files, much easier than powder coating them. I did use the files today and it worked perfectly.could hardly believe it. I hope they group well because they are an awesome bullet and available anywhere here were I live. Thanks again for that info.
|
|
|
Post by GMB54-120 on Oct 6, 2021 22:55:24 GMT -5
Good luck, ive tried the Hornady 300gr 50cals made for 500S&W sabotless and they are a bear to obturate. Needs a pretty hot load to get them to fatten up when fired.
|
|
|
Post by iweetodid on Oct 7, 2021 12:17:43 GMT -5
Good luck, ive tried the Hornady 300gr 50cals made for 500S&W sabotless and they are a bear to obturate. Needs a pretty hot load to get them to fatten up when fired. Well, i'll give it my best shot.
|
|
|
Post by 1murphy on Oct 14, 2021 19:29:55 GMT -5
Did you have any luck with 700ml sabotless?
|
|
|
Post by 71yella on Oct 16, 2021 9:46:35 GMT -5
Also wanting to hear how this worked, as i have a 50 smokeless
|
|
|
Post by dennis on Oct 16, 2021 9:54:07 GMT -5
I (think) Fury makes a 50cal thinner jacketed bonded Knurled bullet about .503 dia. He will make you whatever you want within reason.
|
|
|
Post by 71yella on Oct 16, 2021 18:16:50 GMT -5
Yeah I try some that were 501 diameter and 502, but I was also trying to figure out a powder combination for this gun at the same time so everything I did faught me. I did buy some sample packs so at least he offers though so that you don't have to buy a bunch of unusable bullets
|
|