|
|
Post by dannoboone on Nov 1, 2015 13:14:48 GMT -5
I once had a link to an article about how to bed a Savage. That was years ago and the 'puter
used crashed, so I no longer have the link. It was no where as instructional as "Hillbill's
Bedding 101", but it did help. There's a guy on another forum who wants to know the
procedure, and a picture is as good as a thousand words, as they say. Anyone have a link
for this information?
|
|
|
|
Post by hillbill on Nov 4, 2015 5:16:49 GMT -5
pretty much the same procedure BUT I float the rear tang from the bolt retention screw rearward, If I had known I just did one this weekend?
My MLII jobs all get 3 pillars and the action gets drilled and tapped for a third action screw, maybe Ken or Richard can do a instructional, this is the first one I have done in a couple months.
tell him to add electrical tape to the tang and trim around the edges with a razor knife, I start at the center of the screw hole and go rearward. it leaves a float that's smooth as glass..
|
|
|
|
Post by dannoboone on Nov 4, 2015 19:13:12 GMT -5
Thanks, Bill.
I used two thicknesses of painters tape for the tang area...probably
overkill, but it has shot great ever since rebedding it. First time, I
used ProBed 2000, but did not last. Recoil lug and action loosened
up after a couple years. Dremeled the PB out and replaced it with
Devcon. It still fits like a glove.
|
|
|
|
Post by Richard on Nov 4, 2015 22:37:18 GMT -5
|
|
|
|
Post by rossman40 on Nov 5, 2015 10:40:12 GMT -5
Probed is nice but I will not use it on a heavy kicker anymore. High pressure/energy seems to crush it. In my last composite class we went over fillers.
Glass beads are mixed up to 3 to 1 by volume with resin, yes 3 parts glass beads to 1 part resin .
Reduces weight, a gallon of glass beads only weighs 8oz. A gallon is 231 cubic inches
Reduces shrinkage.
Increases spreadability or in proper terms, lowers viscosity and improves flow.
Lowers cost, a gallon of glass beads cost about $20 and your using less resin.
Big thing was, NOT TO BE USED IN STRUCTUAL APPLICATIONS.
|
|
