|
Post by Kyle on Oct 29, 2017 18:11:09 GMT -5
A witness mark on your ramrod is a necessity. Ideally one should check their barrel with the ramrod before loading to ensure that it is unloaded. Pulling the trigger on a double load is not an option, PERIOD!!! A combined effort by Bill Travis and Jerry Lane has resulted in a tool that can save your day at the range and possibly your hunting season if you happen to double load your muzzleloader. The Double Load Extractor is 24" long assembled and comes with everything required to pull either a jacketed bullet or solid copper bullet .358 caliber and up. The body of the puller is .690" which will fit nicely in most bolt action receivers. A youtube video will be made on this item at a later date to demonstrate how easy it is to use. Cost is $100.00 plus shipping. Shipping charges will vary due to destination as the item is too long to ship flat rate. I'm working on finding shipping tubes to simplify shipping for safe delivery. Available from Pittman Bullets. Good job Jerry and Bill!!!
|
|
|
Post by Richard on Oct 29, 2017 18:40:59 GMT -5
Nice looking little rig!
|
|
|
Post by hillbill on Oct 29, 2017 19:24:52 GMT -5
They Work! every neighborhood of SML shooters needs one of these, I can pull a bullet from start to finish in 5 minutes, that includes taking the barreled action out of the stock and putting it back. I used it at the last shoot, the man would have been done for the weekend without it.
ever try to beat a double load out of a barrel? darn near impossible if it's a tight bullet to begin with.
|
|
|
Post by 12ptdroptine on Oct 29, 2017 19:32:11 GMT -5
Looks like a winner to me. Hope I never need one. But its a good insurance policy IMO. Drop
|
|
|
Post by Kyle on Oct 29, 2017 19:42:25 GMT -5
Your insurance policy is going out in tomorrow's mail.
|
|
|
Post by 12ptdroptine on Oct 29, 2017 20:16:09 GMT -5
ThankYou
|
|
|
Post by Hank on Oct 29, 2017 20:27:36 GMT -5
Looks good and yes it could save your hunting season or your life.. double loads will ruin your day, week, year, life,,,, so what ever you do don't forget that.
|
|
|
Post by hillbill on Oct 29, 2017 20:42:01 GMT -5
Yes that's true I heard a guy say a couple of years ago " I will just have to shoot it out", my reply was? you are an idiot! He didnt shoot it out either. someone who shoots a double load is playing with their life, yours too if you are spectating. It don't matter if it's smokeless or a sub, lot's of smokers have been blown, lot's.
|
|
|
Post by YankeeReb on Oct 30, 2017 4:47:59 GMT -5
Great idea and worth every penny for a bolt gun.
|
|
|
Post by nyhunter on Oct 30, 2017 17:37:50 GMT -5
Mr. Bill Travis = Macgyver Gentlemen great idea , simple but highly effective. !!!
|
|
|
Post by Kyle on Oct 31, 2017 12:10:47 GMT -5
Shipping with tracking to Flagstaff AZ was $14.50. To Galesburg IL with tracking was $10.50, just to give you guys an idea on shipping charges.
|
|
|
Post by hillbill on Oct 31, 2017 19:33:11 GMT -5
This idea was born out of necessity, Why? a double load of course. It didn't take long to come up with the idea and not too much longer to get the first prototype up and running, thought about a patent but it's not like it will be in everyone's tool box. Jerry made a tweak or two and put them into production, with some minor modifications it would work in an inline or a break action as well. Hillbilly/Cuban tech at it's finest!
|
|
|
Post by Kyle on Feb 6, 2018 19:03:14 GMT -5
Double Load Extractors are back in stock. I’ll have them at the polar bear shoot if any are left at that time.
|
|
|
Post by buckeye68 on Feb 6, 2018 20:58:04 GMT -5
Cheap insurance, put my name on one for the Polar Bear Shoot. I’ll call tomorrow for payment.
|
|
|
Post by Kyle on Feb 6, 2018 21:31:29 GMT -5
PM sent
|
|
|
Post by Kyle on Feb 7, 2018 7:20:14 GMT -5
Only 4 left
|
|
|
Post by Kyle on Feb 7, 2018 21:09:50 GMT -5
3 left
|
|
|
Post by Kyle on Feb 7, 2018 22:00:45 GMT -5
2 left
|
|
|
Post by hillbill on Feb 7, 2018 22:03:48 GMT -5
Well I guess Jerry will have to get busy on another batch..
|
|
|
Post by Kyle on Feb 8, 2018 13:03:10 GMT -5
1 left
|
|