bgray
New Member
Posts: 1
|
Post by bgray on Dec 13, 2016 20:29:28 GMT -5
Im wanting to convert my ULM to a .45 smokeless gun. I have no idea where to start!!! New to the custom ml world. Any help would be awesome!! I also have a savage MLII id like to convert to a .45 gun. Help!! Ready go
|
|
|
Post by dennis on Dec 14, 2016 8:16:28 GMT -5
Im wanting to convert my ULM to a .45 smokeless gun. I have no idea where to start!!! New to the custom ml world. Any help would be awesome!! I also have a savage MLII id like to convert to a .45 gun. Help!! Ready go There are a few builders on this board that can help you out. Someone will chime in on your post I'm sure.
|
|
|
Post by hillbill on Dec 14, 2016 9:12:32 GMT -5
Jeff does them but I know he is swamped, maybe he will answer.
|
|
|
Post by nyhunter on Dec 14, 2016 10:31:29 GMT -5
You will need a 45 cal smokeless barrel with a breech-plug installed to start, a lot of the members use a Brux 1:20 twist. You should talk to the member on the board called "Hank" he is a qualified gunsmith and can assist you with purchasing a barrel with a breech-plug (HIS - Hankins Ignition system) installed. If your trying to do this yourself I think the Savage would be easier due to it having a barrel nut for setting head-spacing. He offers Savage Pre-Fit Brux Barrels with Hankins Ignition System. www.hankinscustomrifles.com/muzzle-loading-shooting-supplies/barrels-in-stock/Good luck
|
|
|
Post by Hank on Dec 14, 2016 10:32:17 GMT -5
Jeff is swamped, I am limiting the amount of orders I take in for the next several months. I got to get caught up and will hopefully be there by spring.. Small jobs and parts orders will still be excepted but full blown builds will be limited.
|
|
|
Post by tnhunter54 on Dec 14, 2016 17:33:14 GMT -5
With that being said how is my gun coming along? Do you think it will be ready for the spring shoot?
|
|
|
Post by Hank on Dec 14, 2016 17:53:03 GMT -5
With that being said how is my gun coming along? Do you think it will be ready for the spring shoot? It should be...
|
|
|
Post by deadeyedon89 on Dec 14, 2016 23:35:55 GMT -5
|
|