|
|
Post by speedrackin on Jul 31, 2015 5:36:38 GMT -5
anyone here ever load 130 grn bullets in 308 have a pile of them from my 300 sav . was gonna load some up to try looking for some suggestions?
|
|
|
|
Post by Hank on Jul 31, 2015 8:17:03 GMT -5
I would start with RL15 and 48 grains or IMR4320 and 47 grains... Either one of those should shoot pretty good for you.
Jeff.
|
|
|
|
Post by speedrackin on Aug 1, 2015 6:05:30 GMT -5
Thanks hank u no what id rather do with this .308 model 700 .................
|
|
|
|
Post by herman on Aug 28, 2015 5:34:37 GMT -5
this is a load i shot at 300yds with my tika 308 back in 06  |
|
|
|
Post by YankeeReb on Sept 15, 2015 20:21:13 GMT -5
Hank and Herman are right IMR4320 has been a great powder in my 308's and blr 358.
|
|
beans
Full Member
Posts: 248
|
Post by beans on Feb 9, 2016 23:10:43 GMT -5
Are these 130's flat nosed? If you can't use them or make them work, I may be able to use them as target loads in my 30-30's
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2016 23:20:43 GMT -5
My Criterion barrel likes 46gr Varget under a 165 Accubond or 165 Berger hunter VLD. Start under 44gr and work up. The upper node is at or near pressure.
|
|
|
|
Post by motox369 on Feb 10, 2016 19:42:51 GMT -5
I tried 130 barnes tsx 47-50 grains varget decent load so so accuracy but my gun likes 165 and 180 bullets so i quit the 130s also seemed way too light to hunt with
|
|
|
|
Post by speedrackin on Feb 10, 2016 21:27:40 GMT -5
what we been shootin and it seems to be really good is 29 grns of 4198 with the hornady 130 sp ...only think we killed was a fox at a 100 and i wasnt all that impressed with what bullet did to that little mangie thing. But there really accurate im sure they will work fine on chucks .I will try the varget formula
|
|
