Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 24, 2016 20:03:29 GMT -5
Since jeff has opened up the range ....Anyone have any dope charts for the current bullet/loads ...? My only range is 200yds max....400yds will be a nut cutter of a target,lol....Cool...
|
|
|
|
Post by Kyle on Jul 24, 2016 20:06:34 GMT -5
What is velocity and bullet you plan to shoot. Also line of sight above bore?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 24, 2016 20:48:07 GMT -5
I use the streloc app on my smart phone. I use the free one and have had decent results. I bought the pro and didn't like it very well and the free one gave me better info for NY purposes.
|
|
|
|
Post by Kyle on Jul 24, 2016 21:16:47 GMT -5
I have Ballistic AE loaded on my iPhone. Establishing the correct measurement for line of sight hight above center of bore is very important. All of the ballistic programs are similar, none probably beet than the other for SML purposes.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 24, 2016 21:24:22 GMT -5
I was thinking about the 78gns 4198 /275 accumax zero @100yds approx. 3000ft/sec muzzle vel. 78 degrees F, 60% humidity in Claysville,Kentucky in August,lol.....
|
|
|
|
Post by hando31 on Jul 24, 2016 21:29:05 GMT -5
My gun shooting the 275 Accumax and 78 grains of IMR 4198 requires a dial of 6.25 MOA at 400 yards with a 100 yard zero. I have one of Jeff's guns with a 30 inch barrel, velocity is over 3000, I'll know better when my chronograph shows up this week. I have shot this load out to 600 with good accuracy, most ballistic calculators will get you close, then just some range time to fine tune your dope.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 24, 2016 21:40:17 GMT -5
Thanks Hando ,that's what I'm seeking....Just for comparison and give me something to get me close.....
|
|
