Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 7, 2016 22:50:13 GMT -5
I am getting ready to order a Krieger barrel blank. I see standard and a wide land rifling offered in a .450/.458. Which is recommended? Heavy varmint taper 1.250/.900 29" finish at 28". Twist 1/20. Thoughts, suggestions welcome.
|
|
|
|
Post by bestill458 on May 7, 2016 23:50:49 GMT -5
I would recommend regular width rifling
|
|
|
|
Post by itneverends22 on May 8, 2016 8:47:11 GMT -5
I have one on order for my grandsons encore, standard .450/458 -1-20 twist 1.250, 31 ins, finished at 28 in. with a 2in. barrel drop..
hope this helps..
|
|
|
|
Post by Kyle on May 8, 2016 10:18:36 GMT -5
I have one on order for my grandsons encore, standard .450/458 -1-20 twist 1.250, 31 ins, finished at 28 in. with a 2in. barrel drop.. hope this helps.. Will a 1.250" work on an Encore? I thought 1.0 was about the max. |
|
|
|
Post by itneverends22 on May 8, 2016 11:56:23 GMT -5
Kyle, yes your right, when done at krieger, the blank is 1.25, they will send it to bullerry barrel works and they will turn it to 1, and weld the lug on.. and finish..
then to jeff for the H I S, plug..
|
|
|
|
Post by Kyle on May 8, 2016 12:00:50 GMT -5
Should be a shooter!!
|
|
|
|
Post by itneverends22 on May 8, 2016 12:11:55 GMT -5
Yes, my last barrel for my oncore, you and jeff did the break open video, and it was the last one shot on camera, that 1 came from bullberry..
when I get this 1 done for grandson, going to have jeff build me 1 like yours.. I like the looks of your build, hopefully I'll make The K.C. in august..
|
|
|
|
Post by Kyle on May 8, 2016 12:43:36 GMT -5
Come on down and bring the grandson too. It's a good time. Several others planning on bringing their sons/daughters. My daughters and wife should make the August shoot. Good clean fun!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 8, 2016 13:02:47 GMT -5
Thanks for the reply. I read that the wide lands were for lead cast bullets to minimize lead fouling. I wandered if it would be beneficial with our land riders. Curious as to what Jeff usually orders. I would recommend regular width rifling |
|
|
|
Post by Hank on May 8, 2016 14:53:38 GMT -5
I have ordered them both ways and can't tell a difference in the way they shoot.,,, but I will tell you that at this time I will only be using Brux barrels unless my customer want a Krieger...... They just shoot too dang good
|
|
|
|
Post by itneverends22 on May 9, 2016 11:52:19 GMT -5
Come on down and bring the grandson too. It's a good time. Several others planning on bringing their sons/daughters. My daughters and wife should make the August shoot. Good clean fun! going to try my best, for this fall.. august is a very busy month for me.. |
|
