gfunk
New Member
Posts: 6
|
Post by gfunk on Mar 27, 2024 19:43:23 GMT -5
What are folks using to carry pre-measured loads into the woods for hunting or to the range? Just the traditional ML speedloaders or something else.
|
|
|
Post by adventuraoutdoors on Mar 28, 2024 6:42:22 GMT -5
What are folks using to carry pre-measured loads into the woods for hunting or to the range? Just the traditional ML speedloaders or something else. Pittman Bullets has some vials and boxes on their site.
|
|
|
Post by SURESHOT on Mar 28, 2024 8:05:14 GMT -5
I use a 5ml vial from Pittman's, I will carry (2) with pre measured powder and (2) more with bullet and primer module, and I also use glass vials with screw type caps from ebay 7ML just for powder flows out without sticking, all carried in a small siplock plastic pouch,,,,,,,,,,,,
|
|
sqezer
Junior Member
Posts: 83
|
Post by sqezer on Mar 28, 2024 9:35:31 GMT -5
I use clear Lane tubes, powder in 1 tube with a red top, bullet and primer module in another tube with a white top. The primer module fits ontop of the tub perfectly then cap it.
|
|
|
Post by yoderjac on Mar 28, 2024 16:06:35 GMT -5
Like others, I got some tubes from Pittman. I also bought some larger tubes on Amazon. I use the Pittman tubes for powder, one charge per tube. I use the larger tubes for bullets, 3 bullets per tube. I have a cheek pad on my gun with a pouch that I keep them in while hunting. There are elastic shell holders in the pouch. I put my primed modules in them.
I do all this for convenience, not speed. If I need a quick second shot with those Pittman bullets something is very wrong.
|
|
gfunk
New Member
Posts: 6
|
Post by gfunk on Mar 28, 2024 20:33:50 GMT -5
Thanks everyone. Looks like I’ll get an order into Pittman.
|
|
|
Post by buckeye68 on Mar 30, 2024 15:47:06 GMT -5
|
|
|
Post by dennis on Mar 30, 2024 15:58:57 GMT -5
There are some listed in the buy sell heading
|
|
|
Post by Deputy819 on Apr 1, 2024 6:08:40 GMT -5
I use these. They work GREAT!
|
|
|
Post by hillbill on Apr 1, 2024 13:19:23 GMT -5
For hunting I use 300 ultramag brass with a vacuum line cap Very streamlined and 0 static issues
I also do a storage compartment in my stocks with BDL bottom metal I store a charge, bullet and a couple modules inside Cover it with foam to eliminate tattles If I need to reload in a hurry it pops open and comes out in my hand
|
|