mitch
Junior Member
Posts: 90
|
Post by mitch on Sept 11, 2023 21:29:56 GMT -5
I’ve been shooting my new SML a bit and realized I hadn’t cleaned it yet. Before I did, I figured I’d scope the bore and see just how bad it was. And boy was I ever surprised. Link to the borescope video is below. This is after 59 shots, bore has never been cleaned. Shooting 180hr HAP pistol bullet, 40-cal, load is 50gr IMR 4198.
|
|
|
Post by sew on Nov 5, 2023 8:03:46 GMT -5
Thank you for sharing. Slower powder, under pressured loads in my 40s have really caused me fouling problems.
|
|
|
Post by sew on Nov 13, 2023 6:51:42 GMT -5
Various VV powders in my 3 40s with 3 different bullet wts (195, 228,275 - 120, 130, 530) and at higher calculated pressures, virtually removed any fouling problems.
|
|
|
Post by ballistic on Nov 13, 2023 7:14:48 GMT -5
Various VV powders in my 3 40s with 3 different bullet wts (195, 228,275 - 120, 130, 530) and at higher calculated pressures, virtually removed any fouling problems. Did the VV530 work best with the 275,s ? Thanks for the info.
|
|
|
Post by sew on Nov 13, 2023 9:08:39 GMT -5
Yes. I’m at 71gs but plan to go up some (using DI).
Std disclaimer on load safety.
|
|