grizz
New Member
Posts: 14
|
Post by grizz on Apr 13, 2023 18:03:57 GMT -5
New build almost done. This will be my local gunsmiths first sml build on a bolt action so we are both learning. My question is…my stock is an AG composites alpine hunter with a ramrod channel. Looking for ideas for a way to make or buy a retainer to hold it in. Emailed Kyle Pittman and he said a lot of ppl make a leaf spring style. If anyone has ideas or has done this and could help with details and or pics it would be greatly appreciated.
|
|
|
Post by buckeye68 on Apr 13, 2023 21:09:14 GMT -5
I would buy one from Jeff.
|
|
|
Post by SURESHOT on Apr 14, 2023 5:54:41 GMT -5
What Jeff has up for sale on his web page is the way to go, along with the barel bands if needed.... IMO
|
|
|
Post by Richard on Apr 14, 2023 7:41:46 GMT -5
+1
|
|
|
Post by olegburn on Apr 14, 2023 10:31:02 GMT -5
Back in a day I bedded aluminum tube in the stock that held ramrod On the end closest to the recoil lug inside the tube I had a screw that secured that ramrod in place Aluminum tube sticks out few inches outside the stock It takes 3 or so turns of the rod to get free of the screw I chose to not put the barrel band as it was secure system
|
|
|
Post by caseless on May 4, 2023 19:06:06 GMT -5
I have personally bought and installed Jeff’s system and the results were super. Shooting 300 at around 3000 fps never had and issue with the ramrod dislodging
|
|