|
|
Post by Kyle on Sept 5, 2017 11:28:59 GMT -5
 Here is a sneak peek of the AccuMax.402" 275 grain test Bullets. If all goes as planned, Bill and Jerry will give these a try this weekend. |
|
|
|
Post by sa1000 on Sept 5, 2017 12:32:08 GMT -5
I wish we could use a 40 cal in virginia.
|
|
|
|
Post by Cheytac on Sept 5, 2017 19:02:37 GMT -5
me 2
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 5, 2017 19:16:21 GMT -5
Move to Fla.,lol...
What is the Jacket thickness on these Kyle,sorry if I missed it posted elsewhere..?
|
|
|
|
Post by Kyle on Sept 5, 2017 19:18:44 GMT -5
.025"
|
|
|
|
Post by jsthntn247 on Sept 7, 2017 7:19:40 GMT -5
Would these be more likely to shoot with a sabot than the 225's?
|
|
|
|
Post by Kyle on Sept 7, 2017 7:30:36 GMT -5
Less likely.
|
|
|
|
Post by Richard on Sept 7, 2017 21:08:29 GMT -5
I doubt you will rarely if ever, see a saboted bullet shoot as good as a smooth or full formed bullet. The sabot has always been the weak link in smoke less muzzleloading.
|
|
|
|
Post by eml9 on Sept 8, 2017 20:59:33 GMT -5
Would be pretty sweet if these shoot well sabotted like the 225 .. any plans to test saboted Kyle ?
|
|
|
|
Post by Kyle on Sept 8, 2017 21:07:50 GMT -5
I don't believe these will fare well with sabots in the 275 grain variety, however I could be wrong. The 225 grain sabot testing went well. I may test the 250's and 275's down the road with sabots to see.
|
|
|
|
Post by hillbill on Sept 8, 2017 22:05:34 GMT -5
the 250s MIGHT work in a sabot but I wouldn't bet on it but someone will try soon I'm sure..
|
|
|
|
Post by nyhunter on Sept 8, 2017 23:04:44 GMT -5
Kyle, Good luck with the test !!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 8, 2017 23:14:12 GMT -5
If I were to try these saboted I'd use 3031 powder and knurl the bullets. Getting the bullets to spin with the sabot is what I'd try to accomplish with knurling the bullet.
Pretty neat bullet wish Nebraska would allow 40 Cal
|
|
|
|
Post by GMB54-120 on Sept 9, 2017 9:39:39 GMT -5
the 250s MIGHT work in a sabot but I wouldn't bet on it but someone will try soon I'm sure.. Its possible. The PR DeadCenter 260gr will shoot at smoker speeds in a 1-20 but its also shorter than this 250gr and probably softer. Ive also shot 40cal hardcast 260gr bullets in twists as slow as 1-28. I never got the accuracy i wanted but they didnt keyhole. Assuming the sabot can handle a 250gr at "warp" speed, in theory it could shoot. I would be more interested to see how slow it can go and still be stable. |
|
