|
Post by jorswift on Aug 28, 2017 8:19:12 GMT -5
I am just curious as to what everyone is loading their powder loads in? I am new to this and I had an old timer tell me that the powder will eat the plastic in the plastic speed loaders. What is everyone using?
|
|
|
Post by rlp10ml on Aug 28, 2017 9:39:21 GMT -5
Scroll down to the bottom of the page,this is what most guys use.......https://www.pittmanbullets.com/shooting-accessories/
I have never had an issue with powder eating the plastic either............
|
|
|
Post by nick50471 on Aug 28, 2017 9:41:45 GMT -5
Test tubes from amazon
|
|
|
Post by 12ptdroptine on Aug 28, 2017 10:02:05 GMT -5
I have tried several items over the years. I have never had any that the powder affected. After all these different things I have tried I have to go along and recommend the items Kyle has stocked for sale. I recommend using different size tubes. Size appropriate....so as not to allow an over charge in the vial. He also has some very useful caseguard boxes that work perfectly for the shorter tubes. Contact him and he will steer you to what will work the best for your needs. Good luck and shoot safe Drop
|
|
|
Post by dannoboone on Aug 28, 2017 10:38:37 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 28, 2017 12:26:49 GMT -5
I use the vials that have been listed above for range work. For hunting, I use rifle brass with rubber caps or plugs. The rifle brass has a neck that is smaller than my barrel bore so I can pour the powder in without a funnel. I do not normally hunt with a brake on.
|
|
|
Post by hillbill on Aug 28, 2017 13:23:55 GMT -5
7 mag brass for loads under 75 grains with vaccum line caps from ebay, work perfectly. the tubes Kyle sells do a good job as well but some already have or have access to spent brass.
red caps fit 7mm, black caps for 30 cal
|
|
|
Post by Foxgrape on Aug 28, 2017 13:24:01 GMT -5
The fix for the static elec is to wipe inside of tubes with a dryer sheet.
|
|
|
Post by deadeyedon89 on Aug 28, 2017 14:12:33 GMT -5
|
|
|
Post by YankeeReb on Aug 29, 2017 12:45:01 GMT -5
|
|