|
|
Post by 10gaauto on Jul 16, 2017 22:28:28 GMT -5
Will it fire any other brand of primers? Make sure the bolt handle is "all the way down" and properly engaged. If not down all way this is common result. Not really enough information to thoroughly troubleshoot the problem but we'll start as best can. 10
|
|
|
|
Post by Richard on Jul 17, 2017 4:50:12 GMT -5
10gaauto hit the nail on the head! Check and see that the mechanism on the right side of the action is not binding on the inside of the stock or something is keeping the bolt handle from completely closing. That is almost definitely the problem.
|
|
|
|
Post by nosmoke on Jul 17, 2017 12:34:49 GMT -5
Bolt is all the way down.
|
|
|
|
Post by cornbread on Jul 17, 2017 13:20:49 GMT -5
Check the timing on your bolt. look on the web and see if you can find a link.I had problems with 6mm br, timing was off on bat action and had to work on it!
|
|
|
|
Post by dennis on Jul 17, 2017 13:47:49 GMT -5
I take my bolt apart every once in a while and thoroughly clean the firing pin and all other parts, I have had issues with primers before but mine was because the breach plug shoulder was eroding from cutting, and the inside barrel shoulder galling. Is it a savage plug? Check for cutting/ galling on the plug and inside the barrel.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 17, 2017 15:07:21 GMT -5
Accutrigger...? If so you must fully depress the pre-trigger before engaging the trigger...If you are doing that,then I would suspect headspace issues...Federals are the biggest in diameter that I know of so a different primer would not be tight fit which would give you blowby issues...Hope this helps...
|
|
|
|
Post by Richard on Jul 17, 2017 16:41:41 GMT -5
Have you messed with the trigger weight adjustment? Too light and that can cause a problem.
|
|
|
|
Post by fishhawk on Jul 18, 2017 10:19:16 GMT -5
Could his Federal primers be sitting deeper in the breechplug? Try a different breechplug.
|
|
|
|
Post by 10gaauto on Jul 18, 2017 10:27:19 GMT -5
Could his Federal primers be sitting deeper in the breechplug? Try a different breechplug.
Or the O ring or shims in bottom primer pocket = could help tell what is going on. Or Win primers, they are the longest.
Where are you located? perhaps an experienced SML guy is close and he can help with a hands on trouble shoot.
If you in eastern VA or MD I'm retired and pretty clear schedule. 10
|
|
|
|
Post by nosmoke on Jul 18, 2017 11:21:33 GMT -5
Does anyone know of anyone off the top of their head that might want to buy it? I want to sell it and get Jeff to build me a CVA Scout V2 45-70.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 18, 2017 13:29:52 GMT -5
put it on gunbroker its a mzloader so no ffl required in most areas
|
|
|
|
Post by 10gaauto on Jul 20, 2017 10:26:42 GMT -5
PM sent. 10
|
|
