|
|
Post by kskaggs on Jul 27, 2015 14:09:04 GMT -5
Newbie to sabot less but not smokeless so I have a Hankins adjustable die and I have the die set perfect for the 275 be's my question is if I want to size the 275 match hunters do you think I will have to adjust the die? Sorry in advance if this is a stupid question!! Didn't want to move the die but really don't want to ruin a bullet either!! Thanks kevin
|
|
|
|
Post by bestill458 on Jul 27, 2015 15:59:47 GMT -5
If die is set for ballistic extreme you will definitely have to tighten your sizer alittle smaller. The B.E. has a .015 jacket and match hunter has a .028 jacket so they tend to spring back a little. Run bullet3 passes thru die will help. I personally find the B.E. shoot best loaded fairly loose easy one hand and match hunter seem to like little tighter fit so firm two hands loading. That said you wont have to adjust die down much.
|
|
|
|
Post by kskaggs on Jul 27, 2015 16:12:32 GMT -5
Thanks for the info!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 27, 2015 16:19:06 GMT -5
One of the board members here will always run a few if not all the sized bullets down the barrel prior to shooting or going on a hunt. Just to make dbl sure they are good to go.
|
|
