miked
Junior Member
Posts: 88
|
Post by miked on Oct 19, 2022 18:38:34 GMT -5
I got a DIS plug, modules and shell holder for my Optima as backup to my Scout and also for friends and family to hunt with me occasionally that don't have an ML. I have the RCBS 90201 primer but can't for the life of me figure out how it can prime these. The plunger does not come up far enough to clear the holder and prime the module. I have read people using the 90200 to prime these but didn't think there was much difference the 200 and 201. I can order the 200 if it works and the 201 doesn't but just want to understand whats going on.
|
|
|
Post by dennis on Oct 19, 2022 19:13:57 GMT -5
You need the 200 with the DI module holder
|
|
|
Post by Richard on Oct 19, 2022 19:17:26 GMT -5
Hank has the module holders
|
|
miked
Junior Member
Posts: 88
|
Post by miked on Oct 19, 2022 19:31:08 GMT -5
Hank has the module holders Ok, I have the module holder. So the 200 has the range to go through the holder into the module then?
|
|
|
Post by buckeye68 on Oct 19, 2022 22:41:42 GMT -5
Hank has the module holders Ok, I have the module holder. So the 200 has the range to go through the holder into the module then? I’ll post a picture of the 200 setup tomorrow with the shell holder installed with a DI module. I use the 201 for HIS modules only.
|
|
miked
Junior Member
Posts: 88
|
Post by miked on Oct 20, 2022 6:14:58 GMT -5
Ok, I have the module holder. So the 200 has the range to go through the holder into the module then? I’ll post a picture of the 200 setup tomorrow with the shell holder installed with a DI module. I use the 201 for HIS modules only. That would be awesome thank you! I have the 200 on order from Amazon!
|
|
|
Post by buckeye68 on Oct 20, 2022 22:08:25 GMT -5
RCBS 90202 with and without a module. Attachments:
|
|
|
Post by buckeye68 on Oct 20, 2022 22:09:31 GMT -5
RCBS 90200 with and without a module. Attachments:
|
|
miked
Junior Member
Posts: 88
|
Post by miked on Oct 23, 2022 19:40:17 GMT -5
RCBS 90200 with and without a module. That makes a lot more sense and now I know Im not crazy lol. I have the 201 for my brass HIS modules. The 200 should be here Tuesday for me to start working with the DIS modules. Thank you for the pictures!
|
|
|
Post by buckeye68 on Oct 23, 2022 22:08:31 GMT -5
When I’m priming HIS or the DI modules I always spin the module a little to help the primer center up in the pocket as I’m squeezing the handle. Not sure if it helps or not but that’s just what I do.
|
|