|
|
Post by gd357 on Sept 6, 2022 1:57:59 GMT -5
OK, I've been beating my head against the wall long enough. Does anyone know if there is a 34 mm scope ring that will fit a Weaver-style base? I know the weaver rings will work on a Picatinny rail, but not the other way around. And I'll be darned if I can find anything in a 34 mm ring that isn't specifically for a Picatinny rail.
Maybe I'm not looking in the right place? Any help would be greatly appreciated.
gd
|
|
|
|
Post by Deputy819 on Sept 6, 2022 3:24:23 GMT -5
|
|
|
|
Post by Hank on Sept 6, 2022 7:05:28 GMT -5
What rifle are you wanting to put them on?
|
|
|
|
Post by rickh on Sept 6, 2022 11:15:35 GMT -5
Try looking up Richard Near (Near manufacturing) www.nearmfg.com/. He may be able to help. His stuff is not cheap but most guys I know that use his rings really like them. |
|
|
|
Post by hillbill on Sept 6, 2022 21:07:04 GMT -5
IF you want to put them on a smokeless gun and are using a heavy scope it would likely pay you to change the base to a Pic rail and then use a good ring.
The only rings I use are 6 screw Night Force Ultralights, not cheap but they will hold any scope out there with the 18 inch lbs most scope manufacturers recommend, never had a scope slip with these, ever. no matter how heavy the load/bullet combo.
|
|
|
|
Post by gd357 on Sept 6, 2022 23:57:38 GMT -5
Not going on a SML. Long story short the rifle has a fixed weaver-style base, and making alterations would be more hassle than would be worth the time I have to invest in the project (for now).
D819, those might work. Will investigate further...
|
|
|
|
Post by GMB54-120 on Oct 4, 2022 15:19:08 GMT -5
Warnes Moutain Tech and Althon Precision 34mm rings should fit weaver bases. Warnes makes those for Athon.
|
|
