|
|
Post by Hank on Jan 8, 2016 15:59:32 GMT -5
Ain't no pigs on my farm, done killed them all...
|
|
|
|
Post by tnhunter54 on Jan 8, 2016 17:29:47 GMT -5
Hank I didn't think it was possible to kill them all. Those rascals just seam to keep coming back.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 8, 2016 17:57:46 GMT -5
Hank I didn't think it was possible to kill them all. Those rascals just seam to keep coming back. All of his Guard deer ran them off after he killed a few of the boars,lol... |
|
|
|
Post by Kyle on Jan 9, 2016 21:55:46 GMT -5
Sent Kyle a check yesterday for some 275's!! Can't wait to try them!! Kevin PM Sent. Thanks Kevin!! |
|
|
|
Post by nyhunter on Jan 14, 2016 10:26:49 GMT -5
Look forward to trying the 275's out, have them on order with a 45-70 conversion Jeff is making for us.
|
|
|
|
Post by Kyle on Jan 14, 2016 12:20:02 GMT -5
Just got more 275's in today. Kyle
|
|
|
|
Post by Kyle on Jan 14, 2016 12:24:42 GMT -5
nyhunter, PM sent. Thanks, Kyle
|
|
|
|
Post by kskaggs on Jan 14, 2016 20:44:04 GMT -5
Just got some of Kyle's bullets in the mail and I sized a few of them had to go a half a notch past the setting I use for the 275 match hunters on the Hankins die. Is this what everybody else is seeing? This is in a Brux barrel. Gonna try to let some fly in the morning before work.
|
|
|
|
Post by deadeyedon89 on Jan 14, 2016 20:54:55 GMT -5
Just got some of Kyle's bullets in the mail and I sized a few of them had to go a half a notch past the setting I use for the 275 match hunters on the Hankins die. Is this what everybody else is seeing? This is in a Brux barrel. Gonna try to let some fly in the morning before work. Smooth? FF?....... I used the full form die that was set for my 275 MH and the Pittman accumax was a little more loose going down the barrel than the match hunter....BUT...... with unbelievable accurate results...... the first three accumaxi ever shot measured .193. I know you are going to love the results you get with Kyles bullets! |
|
|
|
Post by kskaggs on Jan 14, 2016 21:04:40 GMT -5
Sorry smooth!!
|
|
|
|
Post by Kyle on Jan 14, 2016 23:33:08 GMT -5
Just got some of Kyle's bullets in the mail and I sized a few of them had to go a half a notch past the setting I use for the 275 match hunters on the Hankins die. Is this what everybody else is seeing? This is in a Brux barrel. Gonna try to let some fly in the morning before work. Smooth? FF?....... I used the full form die that was set for my 275 MH and the Pittman accumax was a little more loose going down the barrel than the match hunter....BUT...... with unbelievable accurate results...... the first three accumaxi ever shot measured .193. I know you are going to love the results you get with Kyles bullets! I had the same result as Don when I started with my die that I previously used with the MH. My bullet fit looser than I liked with that setting. I readjusted my die for a tighter fit, one arm of pressure while sitting down, and that worked great. That is just my personal preference. With the .021" jacket on my design you can seat the bullet a little looser than others and still be good on obturation. Kyle |
|
|
|
Post by deadeye on Jan 14, 2016 23:52:14 GMT -5
had the exact same as d89 & kyle on the 275's I tested...
fwiw- with parkers from lot to lot I usually had to adjust the die usually 1-1/2 notch(either way) when I received new bullets....approx. 1.5k mh's shot down the tube over a few yrs.
last batch of 327mh's seemed a little more volatile on hair & a little better on paper-weight's varied by approx. 2gns..(possibly suggesting a slightly thinner jacket)
pittman 275's weight's were within .14gns
keep up the great work guy's! |
|
