Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 18, 2016 14:41:17 GMT -5
The forecast looks good....I have more work than I can even get to, my gun is not completed, the spring challenge is just not in the cards for me this time, you guys have a safe and fun weekend,sorry I can't make it up there....
|
|
|
Post by Richard on Apr 18, 2016 16:52:08 GMT -5
Not to worry Allen, just overnight the shrimp to the "Evergreen" motel and I will see that they get to the shoot!
|
|
|
Post by Richard on Apr 18, 2016 16:53:38 GMT -5
Don't forget to have my shooting stool dusted off Jeff!
|
|
|
Post by Hank on Apr 18, 2016 17:58:57 GMT -5
Allen... Sorry to hear you can't make it to the spring shoot... The good news is there's always the fall shoot and then a spring shoot next year..... This has became a standard for the Smokeless Muzzleloader shooter... We will continue to grow and grow... and one day we will have a Deadeyes Kitchen complete with pots and pans and all the utensils needed to whip up some good eating.......
Richard... I found your stool 300 yards down stream last week... looks like the raccoons liked it as much as you did,, however,,, it is still in pretty good shape.....
|
|
|
Post by Kyle on Apr 18, 2016 19:23:10 GMT -5
Not to worry Allen, just overnight the shrimp to the "Evergreen" motel and I will see that they get to the shoot! Don't let Mr Dinersh near them shrimp with curry powder!
|
|
|
Post by Richard on Apr 19, 2016 14:53:09 GMT -5
Oh yes, Please to tell..lots of curry! The AccuMax bullets were definitely liking the duplex today Kyle! BTW, Elkman got your bullets today and said you need to supply band aids with those bullets as the tips are too sharp! 
|
|
|
Post by hando31 on Apr 21, 2016 6:52:48 GMT -5
I'll be heading out tomorrow morning, should arrive at the Evergreen between 1 and 2. If anyone that's staying there is going to the range Friday afternoon if I could follow you there it would be great. My first KY challenge and I'm not exactly sure where the range is.
|
|
|
Post by tnhunter54 on Apr 21, 2016 10:09:56 GMT -5
I should be getting to the motel around the same time and you can follow me, hope I remember how to get there.
|
|
WGK
Full Member
 
Posts: 154
|
Post by WGK on Apr 21, 2016 10:12:47 GMT -5
Scat and I will be heading out tomorrow evening. Plan on spending the night in Paris Ky then headed over Saturday morning. Really look forward to meeting all you fine gentleman. LOL
|
|
|
Post by Richard on Apr 21, 2016 10:29:28 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 21, 2016 12:31:46 GMT -5
|
|
|
Post by 12ptdroptine on Apr 21, 2016 14:31:51 GMT -5
I sent you some information Eric.......check your private messages. Oh, and I just got done turning two head of cabbage into some tasty coleslaw...........or is it COLDslaw...............Ramber?     ??  If you say it fast enough it becomes "Coslaw"
|
|
|
Post by Richard on Apr 21, 2016 15:52:09 GMT -5
How about if your not so fast as say it half-ass???
|
|
|
Post by 12ptdroptine on Apr 21, 2016 16:22:03 GMT -5
Lol.....getting ready to pull out
|
|
|
Post by rossman40 on Apr 21, 2016 16:36:52 GMT -5
I thought I was going to make this time but the wife's vans transmission took a dump and she has to work this weekend. Like said there is always the next one.
|
|
|
Post by Hank on Apr 21, 2016 20:40:12 GMT -5
Yep.,, there will always be a next one.
|
|
|
Post by Richard on Aug 7, 2016 10:45:25 GMT -5
Well, the next one is here Mark? Or are you going to the other one in NC if they ever have it?
|
|
|
Post by yosemitesam on Jan 21, 2022 20:10:50 GMT -5
Hank, Can't find out how else to contact you. I am going to order some additional primer modules from you (yes these old frozen fingers have dropped a few in unrecoverable places) and I noticed you have a primer module resizer. I am totally baffled at the options of thread size. I assumed, like all my sizers, they would be threaded for the usual RCBS press. Obviously I am missing something here. I like the idea of a primer resizer as I recently had to replace the extractor my Rem 700 conversion you did. The primers became stuck in the breech plug and eventually damaged the extractor. These were not fired but admittedly felt tight when I cammed down the bolt. So my Q is what the heck does this primer module resizer fit in?
|
|