|
Post by jaybird59 on Feb 1, 2022 19:39:07 GMT -5
When threading the muzzle for Hank’s self timing tactical break, how far does the barrel need go in the break? I usually do a target crown and stop at the last thread on the radial breaks. With the chevron port shape I didn’t know what produces best accuracy. Thanks for any advice.
|
|
|
Post by hillbill on Feb 1, 2022 20:20:45 GMT -5
Stop short of the port cut out and you are good to go, I like to leave a thread or two exposed inside the brake.
|
|
|
Post by jaybird59 on Feb 1, 2022 23:04:22 GMT -5
Thanks for your help!
|
|
|
Post by Hank on Feb 6, 2022 9:16:28 GMT -5
When threading the muzzle for Hank’s self timing tactical break, how far does the barrel need go in the break? I usually do a target crown and stop at the last thread on the radial breaks. With the chevron port shape I didn’t know what produces best accuracy. Thanks for any advice. I cut my tenon length .600 for those brakes. This will leave you just short of the first port.
|
|