Loads for 45 smokeless muzzleloader

If I get one it will be his ignition and I am really looking for a list of different loads to try.

I have a Scout with the His plug. I like the 250 gr. bullets for less recoil, plus took the brake off so I could shoot saboted loads too. My most accurate loads are 45 gr of Imr 4227 with a wool wad and a barnes 250 tez bullet or remington 250 accutip, same bullet different color tip, I slightly size them down just a touch and then knurl them between two files and that plumps them back up some, this load will shoot 3/4" cluster at 104 yds. and this load will do the same thing with fury 250 crimped bullets. with sabots my gun likes the 200 yellow tip shock waves,40 cal and light blue harvester smooth sabots, with a wool wad under the sabot which is a must with my gun with any load, and 54 gr. pf 4198, using Imr recently. even 53gr of 4198 is good. I also really like the 250 gr. crimp nosed fury 40 cal in a sabot. with 275 gr. full size .452 bullets sized down and 4198 powder I was struggling to shoot good groups using 56-59 gr. and didnt want to go higher on the charge. these guns are tough on scopes and I had just put a leupold vx3i 3.5-10x40 on it so I am wanting to protect it if I can. that little 40 cal sst or shock wave at 200gr. in a sabot has been a good shooter in alot of loads I have tried using 4198, but its a small bullet that shouldnt be pushed too hard for hunting. I'm now using cci large rifle primers. these are the loads I feel are safe in my gun so proceed with caution and use any of this info at your own risk.