|
|
Post by 10gaauto on Feb 21, 2020 22:54:08 GMT -5
Seems always have a bunch of ammo to de-mil for various reasons. The old hammer/inertia type bullet puller kinda slow and too much slamming and work.
Looking for recommendation for a die type puller to put in the press. Thanks, 10 |
|
|
|
Post by dennis on Feb 23, 2020 7:41:10 GMT -5
I have always used RCBS in my loading press just need a collet for each cal bullet.
|
|
|
|
Post by Richard on May 11, 2020 20:00:09 GMT -5
The one on the top is the one I use most. I believe it is made by Davidson. This one has openings for I believe .224, 6mm and .30 cal. You run your round up thru your press with no die in it. Then grab the bullet and squeeze...........pull down on the handle and you will be left with the bullet in the tool........provided they are not too tight. This tool can probably be gotten from Brownell's. It does not ruin the bullet.  |
|
|
|
Post by YankeeReb on Jun 2, 2020 7:53:32 GMT -5
|
|
