Post by elkman1310 on Sept 24, 2019 16:27:56 GMT -5
Well I got around to doing the Edge barrel today I had planned on keeping it a straight 1.250 barrel but then decided to do a taper job to get some weight off the barrel . it finished off at 31 inches plus a brake. It has a 1.250 shank for 6 inches then tapers down to 1.110 still fairly heavy but it should help control the whip of that big 300gr going down the barrel at 4,000 fps yeah right if I get good accuracy around 2860 2900 I will be happy.
The reamer I bought was supposed to have a longer throat for the 300gr but it is still to short for my taste so I plan on throating it out another .100 or more to get the bullet out were I want it this is a single feed gun so COAL is not a problem.
I have H1000 RL 25 and RL 33 plus some surplus stuff that has always worked in big mag's probably won't get to shoot it till the weekend.
