|
|
Post by joelmoney on Jun 23, 2018 10:36:37 GMT -5
12pointdroptine turned me on to this tool at the spring challenge and I like it! This thing has to be the most accurate easy to use way to get your scope leveled.
|
|
|
|
Post by hillbill on Jun 23, 2018 11:15:03 GMT -5
It seems to work well.
|
|
|
|
Post by dennis on Jun 23, 2018 12:44:15 GMT -5
I just used a friend's and found my scope to be canted about 2-3 degrees. Good tool to have.
|
|
|
|
Post by rojo23 on Jun 26, 2018 14:09:44 GMT -5
I have used the bubble level on the action and on the turret top. I really never thought that was the most accurate. I have tried using a plumb bob and a string but how do you determine if your action is plumb? This maybe something for me to look into
|
|
|
|
Post by hillbill on Aug 18, 2018 6:19:25 GMT -5
The only true way to know if your scope is tracking perfectly vertical is to get it clamped in a vice after using one of the above methods to level your scope and put a vertical line on a board at distance and spin your elevation up to see if it is tracking true vertical, you might be surprised how much it is off. I level my pic rail first and go from there but that don't necessarily mean the action holes were drilled perfectly on center. Custom actions are generally spot on, others?  |
|
