|
Post by 10gaauto on May 27, 2017 20:38:45 GMT -5
Have 2 Omegas in build stages. One for BH the other will be Brux/Omega. What about "bedding" these guns. Anybody done anything in that vein. Both will have lam stocks. How does that go/work on this platform. I have bedded MLIIs, Rem 700MLs and some RF and CF rifles, all bolters. Never done a break or drop block type. Thanks, 10
|
|
|
Post by bestill458 on May 28, 2017 11:31:22 GMT -5
If using ramrod in gun bedding a omega is a challenge. I have found if you make pillars with a eschusion or washer type head integrated with pillar and install them no need to bed since there's no action and is the barrel. The square lug in barrel fit well in stock.
|
|