floyd
Full Member
Posts: 216
|
Post by floyd on Sept 26, 2018 9:16:39 GMT -5
Anyone shooting the Accumax 225 with hsb Sabots and BH209?
|
|
|
Post by doug136 on Sept 26, 2018 13:56:49 GMT -5
I have not tried but I have shot the 225s out of a .40 with Blackhorn 209 . I shot 84 to 95 grains of Bkackhorn 209 by weight with the Accumax 225s from 100 to 500 yards with very good accuracy.Speed was close to 2500fps .
|
|
floyd
Full Member
Posts: 216
|
Post by floyd on Sept 28, 2018 13:02:25 GMT -5
Answered my own question. 3/4 inch group at 100 yds with 95 gr bh-209. 2425 fps by magnetospeed.
|
|
|
Post by Kyle on Sept 28, 2018 20:12:18 GMT -5
Answered my own question. 3/4 inch group at 100 yds with 95 gr bh-209. 2425 fps by magnetospeed. That ain't bad at all!! Good Shooting Floyd!! All drops should be verified on paper before hunting, that said -With a 100 yard zero drops should look something like this: Yards MOA FPS KE 100 0.0 2175 2362 150 -1.15 2055 2110 200 -2.71 1940 1879 250 -4.53 1828 1670 300 -6.57 1721 1480 350 -8.83 1619 1310 400 -11.32 1523 1158
|
|
floyd
Full Member
Posts: 216
|
Post by floyd on Sept 28, 2018 20:17:59 GMT -5
Answered my own question. 3/4 inch group at 100 yds with 95 gr bh-209. 2425 fps by magnetospeed. That ain't bad at all!! Good Shooting Floyd!! All drops should be verified on paper before hunting, that said -With a 100 yard zero drops should look something like this: Yards MOA FPS KE 100 0.0 2175 2362 150 -1.15 2055 2110 200 -2.71 1940 1879 250 -4.53 1828 1670 300 -6.57 1721 1480 350 -8.83 1619 1310 400 -11.32 1523 1158 Thanks for the data Kyle. I am using a 200 yd zero. I am shooting a Bullberry DD /pacnor with 209 ignition (Encore frame). How much difference in velocity do you think I would see with the .402 250 Accumax with hsb sabot?
|
|
|
Post by Kyle on Sept 28, 2018 20:34:17 GMT -5
Hard to tell. Blackhorn will get a better burn with heavier bullets. Might not loose that much velocity at all.
|
|